Skip to content

BMW & MINI Throttle Body Adaptation Reset

If the Vehicle has a rough idle, then we need to perform a
Throttle Reset Adaptation

(No Diagnostic Tools Required!)

1. Please make sure the ignition is Turned Off.
2. Press the Gas Pedal to Full Throttle (while ignition is off).
3. Turn on the Ignition to position 2 for 30 seconds (Do Not Crank the Vehicle) (Do Not let go of the Throttle)

4. After 30 seconds are over, Turn Ignition Off and Remove Key (Do Not let go of the Throttle).

5. After Key is Removed, let go of the Throttle and wait
30 seconds.
 

6. After 30 Seconds, the Car can now be Started normally.
Previous article MINI Cooper R55 R56 R60 Engine Control Unit Failures (ECU/DME)
Next article SCR / DPF Delete - DPF clogged? Here’s how to fix it